Description

ABB MDO32BNS

1. Operating Temperature:-20°C to +70°C

2. Power Consumption:5W

3. Communication Protocol:Modbus RTU, CANopen

4. Input Voltage Range:12V to 24V DC

5. Dimensions (LxWxH):150mm x 70mm x 25mm

6. Connectivity:2x RS-485, 1x CAN

7. Load Rating:1A/24VDC per channel

The ABB MDO32BNS module is engineered to provide precise control over industrial processes, boasting advanced digital signal processing capabilities for unparalleled accuracy.

Featuring robust temperature tolerance from -20°C to +60°C, this module ensures reliable operation in various industrial environments, from cold storage facilities to hot manufacturing zones.

Equipped with Ethernet and Modbus TCP/IP communication interfaces, the MDO32BNS facilitates seamless integration with existing network systems, enhancing connectivity and data exchange within complex automation setups.

With 4 analog input channels, the module allows for real-time monitoring of critical process variables, enabling proactive adjustments to maintain optimal operational conditions.

Offering 2 analog output channels, the MDO32BNS provides the necessary control signals for actuators and valves, ensuring precise control over processes requiring fine-tuning.

ABB Main Series

ABB Accuray	ABB H&B Contrans T	ABB RAZOA	ABB Procontrol P13
ABB Advant OCS	ABB H&B Contronic	ABB Robots	ABB Procontrol P14
ABB Advant-800xA	ABB H&B Freelance 2000	ABB SattControl	ABB Fischer & Porter DCI
ABB Bailey Infi 90 and Net 90	ABB Master	ABB Synpol D	ABB UNITROL
ABB Commander	ABB MOD 300	ABB Taylor MOD 30	ABB Procontic
ABB Drives	ABB MOD 30ML/MODCELL	ABB Triguard	ABB Turbotrol
ABB Electrical

Our purpose

A Distributed Control System (DCS) is a computer-based system used to automate, monitor and control complex industrial processes. It is typically used in large plants such as refineries, power plants, chemical plants, and paper mills.

A DCS consists of several components that work together to control the process. These components include:

1. Controllers:These are devices that receive input from sensors and send output signals to actuators. Controllers use pre-programmed logic to control the process.

2. Sensors:These are devices that measure physical quantities such as temperature, pressure, flow, and level.

3. Actuators:These are devices that control physical processes such as opening and closing valves, starting and stopping motors, and adjusting dampers.

4. Operator stations:These are human-machine interfaces (HMI) that allow operators to monitor the process, make changes to setpoints, and troubleshoot problems.

5. Communication network:This network connects all of the components of the DCS together.